|
|
|
Gusseted Plastic Angle Bracket (pack of 10)
Here's a very lightweight 3/4" by 3/4" plastic gusseted angle bracket. We use these a lot in our various kits to mount things like servos to bases. Made of nearly unbreakable high density polyethylene, this bracket is mounted using #4 to #8 screws (not included). You can also drill out the hole if needed for 1/4"-20 fasteners.
Note the gusset that adds support and strength to this angle bracket. Though very lightweight -- just a few grams -- these are about as strong as steel brackets of the same size.
Sold in convenient packs of 10.
SKU Number:BRAC-GUS1
|
|
|
|
|
Wide 2" Gusseted Plastic Angle Bracket (pack of 8)
Just like our standard gusseted plastic angle brackets, but 2" wide, for those jobs where you need extra, extra stength. Four pre-drilled holes for #4 to #8 screws.
Comes in packs of 8.
SKU Number:BRAC-GUS2
|
|
|
|
|
|
Plastic Rounded Corner Bracket (pack of 8)
Lightweight 1" by 1" plastic angle bracket. Made of nearly unbreakable high density polyethylene, this bracket is mounted using #4 to #6 screws (not included). 5/8" wide.
Sold in packs of 8.
SKU Number:BRAC-RND
|
|
|
|
|
|
Slotted Groove Corner Bracket (pack of 8)
Plastic corner bracket with side gussets provide a 3/8" long slotted groove for mounting flexibility. The groove will accommodate up to #8 screws. Measures 5/8" wide, by 15/16" x 15/16". Made of lightweight but nearly unbreakable high density polyethylene.
Sold in packs of 8.
SKU Number:BRAC-SLOTTED
|
|
|
|
|
Metal Angle Brackets (8 pack)
Here's a convenient package of 8 (eight) small plated-steel metal brackets, at about half the price of similar sized brackets at the hardware store. Their rounded ends make them more attractive than the typical metal bracket.
Width is 3/8"; thickness is 1/16" (approximately 16 guage), and therefore very strong. The L-shape has slightly uneven dimensions: 11/16" in one direction ("leg"), and 5/8" in the other. Pre-drilled for #8 screws. The slightly longer leg has a 5/16" long slot.
We use these brackets in a number of out kits. Weight is a low 2.6 grams each.
SKU Number:BRAC-SMMET
|
|
|
|
|
|
Stainless Steel Bracket (8 pack)
Very high quality (non-magnetic) stainless steel brackets, useful for all types of robot construction. Approximately 12 guage thickness. Very strong. The bracket is an uneven L-shape. Measures 3/4" of an inch wide; 2 1/4" inches in length on the long end of the L, and 5/8" on the short end of the L. Holes on each end of the L are pre-drilled to accommodate up to #10 screw. Weight of each bracket is 0.5 oz.
Sold in convenient packs of 8.
SKU Number:BRAC-SSTEEL
|
|
|
|
|
Aluminum/Nylon Risers, Set of Four
Aluminum and nylon threaded risers, complete with nylon or steel machine screws. In sets of four (four risers, eight screws). Materials chosen for their strength and light weight. Select from among several popular lengths.
1" Aluminum
- 0.1875" round standoffs (4)
- 4-40 threads
- 4-40 x 1/2" screws (8)
- Total weight: 0.3 oz (8g)
1.25" Aluminum
- 0.250" hex standoffs (4)
- 4-40 threads
- 4-40 x 1/2" steel screws (8)
- Total weight: 0.5 oz (16g)
1.75" Aluminum
- 0.250" hex standoffs (4)
- 4-40 threads
- 4-40 x 1/2" steel screws (8)
- Total weight: 0.7 oz (20g)
1" Nylon
- 0.250" hex standoffs (4)
- 4-40 threads
- 4-40 x 1/2" steel screws (8)
- Total weight: 0.1 oz (4g)
SKU Number:RISER-SET
|
|
|
|
|
|
Nylon Spacer Standoffs (pack of 8)
Nylon threaded hex standoffs are 9/16" long, and available with either F-F or M-F threads. Threads are 4-40. M-F standoffs can be threaded to one another to make various lengths.
Does not include 4-40 hardware. See our 4-40- micro fasteners for 4-40 steel machine screws, in lengths from 3/8" to 1".
Sold in packs of 8 (eight).
SKU Number:RISER-NYL
|
|
